Results 1 to 9 of 9

Thread: 19dg

  1. #1
    Join Date
    May 2004
    Posts
    205

    19dg

    Can somebody please give me the factory torque values for the condensor water box cover on the carrier 19DG. 6564 CP, the cooling tower is at the same level
    I know the guy who know's the "Chiller Whisperer"

  2. #2
    Join Date
    Mar 2007
    Posts
    3,135
    Are you serious?
    The key to happiness is lower expectations.

  3. #3
    Join Date
    Dec 2008
    Location
    Dixiana, AL
    Posts
    2,611
    Someone, somewhere, living in cellar beneath a house on a plain in Kansas with a small dog probably has that spec. The rest of us just tighten them up so they don't leak.

  4. #4
    Join Date
    May 2004
    Posts
    205
    One of the apprentices called and asked me thought I'd be a smart ass and give him a number, Appreciate the sarcasm though
    I know the guy who know's the "Chiller Whisperer"

  5. #5
    Join Date
    Mar 2007
    Posts
    3,135
    Quote Originally Posted by klove View Post
    Someone, somewhere, living in cellar beneath a house on a plain in Kansas with a small dog probably has that spec. The rest of us just tighten them up so they don't leak.
    Sounds like Supertek65 lol
    The key to happiness is lower expectations.

  6. #6
    Join Date
    Aug 2009
    Location
    Maine
    Posts
    3,688
    Quote Originally Posted by joegrind View Post
    One of the apprentices called and asked me thought I'd be a smart ass and give him a number, Appreciate the sarcasm though
    1/2 a turn before it breaks.

  7. #7
    Join Date
    Mar 2007
    Posts
    3,135
    I think those bolts are 1/2" Grade 5. I'd say the spec is probably somewhere around 80-87 ft./lbs.
    The key to happiness is lower expectations.

  8. #8
    Join Date
    May 2004
    Posts
    205
    There, was that so hard tech Rob! Now I can look smart from the apprentice. I'll tell him 80 foot-pounds, crisscross applesauce
    I know the guy who know's the "Chiller Whisperer"

  9. #9
    Join Date
    Mar 2010
    Location
    Va.
    Posts
    180
    It's crisscross puddnsauce

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event