Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2006
    Location
    New England
    Posts
    189

    water temperature sensor calibration device

    Hi All -
    We've got a lot of 10K-2 immersion sensors wired to our BMS and need to calibrate these sensors. I have heard of NIST temperature calibration tools that insert through a Pete's Plug and directly measure the water temperature to give a point of reference for calibrations/offsets in the BMS.
    I've found the Fluke device but wonder if anyone could give a product recommendation?
    Thank you.

  2. #2
    Join Date
    Jan 2012
    Location
    California
    Posts
    85
    We use one like this when specified. http://www.omega.com/ppt/pptsc.asp?r...000&Nav=vhta05 I don't remember the exact brand but it works well.

  3. #3
    Join Date
    Aug 2011
    Location
    Denver PA
    Posts
    34
    I have a Fluke 50D that works well. The company I work for send it out yearly to get calibrated and NIST certified. If you in the Fluke catalog they have probes that can be inserted into a Pete's Plug. I had one i and did it all the time. Sometimes I remove a gauge out of it's well and get my readings.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event