Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2008
    Location
    Georgia
    Posts
    13

    TAC product review

    I am looking for some feedback on the following T.A.C. product;

    VBB2N03+M133A01
    Two-Way Ball Valve Assemblies
    with TAC® DuraDrive™ Floating
    and Proportional Actuators

    If anyone has used this product, I would enjoy hearing if you have had any failures in either component. I am a little hard pushed to belive it is a better product than Belimo. Thanks for your time

    Mike

  2. #2
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    724
    Can't help you there we strickly use Belimo primarily because they ship fast and we don't have to wait weeks. You should be able to get a comparable Belimo for under a C Note.
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event