I recently just finished the Niagara AX Certification class. My company has scheduled me for a small first time Lon Integration. Apparently there is some sort of Distech VAV controllers on one floor of this building. They are wanting to replace all of these controllers with XL10 VAV controllers to make this floor like all of the other floors. I am assuming that this won't be to bad, but I just wanted to see if you guys have any pointers. I am not real familiar with Honeywell XL10 Controllers. I am assuming that I should use the same Node IDs that were used previously on the Distech controllers. Are this controllers configured with LONspec before there installed on the network? I have a XL10 AX wizard on the customer's workstation. Should I just be able to discover the new XL10 controllers once I have connected them to the network? Then should I just drag and drop the controllers in the existing VAV folders or just create new ones then delete the old ones at the end?
Thanks for any pointers on this.