Results 1 to 7 of 7
Thread: John Wayne on Liberals
-
03-17-2013, 10:54 PM #1
Professional Member
- Join Date
- Nov 2006
- Location
- Desert Southwest
- Posts
- 400
John Wayne on Liberals
Worth hearing again.
If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
No good deed goes unpunished.
If you want to take off friday to go fishing then make sure you train your helper right.
-
03-18-2013, 05:32 AM #2
Atta boy John!
"If anybody can draw on the power, where do we put the meter?" - JP Morgan before pulling Tesla funding
-
03-18-2013, 06:54 AM #3
Lot of skeletons in that mans closet..... if you know what I mean....
Rock Hudson....conservative.......Liberace.......lol... .. conservativeLet go of my cracker jacks, If you dont Im going to have to beat you....... now then hand my captain crunch back over to me this instant.....or else !!!
-
03-18-2013, 07:03 AM #4
Probably less than you cornball.
"If anybody can draw on the power, where do we put the meter?" - JP Morgan before pulling Tesla funding
-
03-18-2013, 09:00 AM #5
You got that right cool. Corny has also claimed in the past that Elvis was gay too. When pushed for back up he claimed that he got that from a "reliable" unnamed source in the "entertainment" field. Yeah sure. His nose length must be in the Genius Book of Records for sure with out a doubt. Thank you, thank you very much
"I could have ended the war in a month. I could have made North Vietnam look like a mud puddle."
"I have little interest in streamlining government or in making it more efficient, for I mean to reduce its size. I do not undertake to promote welfare, for I propose to extend freedom. My aim is not to pass laws, but to repeal them."
Barry Goldwater
-
03-18-2013, 10:50 AM #6
Professional Member
- Join Date
- Nov 2006
- Location
- Desert Southwest
- Posts
- 400
If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
No good deed goes unpunished.
If you want to take off friday to go fishing then make sure you train your helper right.
-
03-18-2013, 11:51 AM #7


Reply With Quote

