Results 1 to 6 of 6
-
03-17-2013, 09:34 AM #1
Professional Member
- Join Date
- Mar 2011
- Location
- Birmingham, AL
- Posts
- 21
Digi Cool AK 900 Manifold Rebuild
My high side ball valve slowly leaks into my center port when closed on my AK manifold. Brenda mailed me replacement teflon seals and O-rings. I pulled the red dial off and unscrewed the brass pieces, but how do I access/replace the teflon ring? I couldn't find any posts on this.
-
03-17-2013, 09:58 AM #2
Professional Member*
- Join Date
- May 2009
- Location
- Savannah, Ga/H.H. Island, S.C.
- Posts
- 792
Shoot an email to Doug Lockhart via this or the Digi-cool website.
Doug will point you in the right direction.
-
03-17-2013, 07:11 PM #3
Professional Member
- Join Date
- Mar 2011
- Location
- Birmingham, AL
- Posts
- 21
Has anyone else replaced their teflon seal?
-
03-17-2013, 07:17 PM #4
Professional Member
- Join Date
- Jan 2008
- Location
- In the work truck
- Posts
- 2,845
no did you try giving that nut a little turn to tighten it before you pulled everything apart? Thats all mine needed..
Gotta have the right tool for the job!
Where is all the stuff MADE IN THE USA?
"Thats what we do Troy. Incredible, Invisible, Imbelivable things. We are an Unseen, Unknown, Unvincible fraternity of craftsman.."
-
03-17-2013, 08:46 PM #5
Professional Member
- Join Date
- Mar 2011
- Location
- Birmingham, AL
- Posts
- 21
It was already tight. I unscrewed the nut and re-tightened. It still leaks. Didn't leak during the first 10 months.
-
03-17-2013, 09:38 PM #6
Professional Member
- Join Date
- May 2010
- Location
- Canada
- Posts
- 303
Try some Nylog.
Reply With Quote
