penn 266

[tibs]

Hi, can we resume the factory default setting on this control and how ?

Thanks

[slctech]

Like asking what is the spark gap for my V8 engine. There are numerous V8 engines out there and each is a bit different. As with the Penn 266 series condenser fan controls, there are numerous models, which is yours and how it corresponds to the existing equipment is in the air at this moment.

Here is a publicly accessible brochure and install manual on that series of controller, outlining what the numerous models are and what they can and can't do with the transducers installed.

http://cgproducts.johnsoncontrols.co...F/12011534.pdf


http://cgproducts.johnsoncontrols.co...2476642705.pdf

[tibs]

The question is , can we resume the default setting, when another programation have been done. no matter which 266, thanks .

P266 Series Control Setup Values and Modes
The P266 Series Control ships with up to ten factory
default setup values and modes. These settings can be
adjusted in the field (if required) to meet your specific
condenser application requirements.

[hands]

Yes, you can change the settings back to the default settings.

[hvac69]

Manual
Page 11 is the default settings. You will need to set each one manually back to default.