Results 1 to 4 of 4
-
03-07-2013, 09:54 PM #1
Professional Member
- Join Date
- Nov 2006
- Location
- Desert Southwest
- Posts
- 400
What's the procedure to replace a JCI FEC with a PCG?
I have an FEC 1610 that died whats the best solution for replacement?
If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
No good deed goes unpunished.
If you want to take off friday to go fishing then make sure you train your helper right.
-
03-07-2013, 10:07 PM #2
Professional Member
- Join Date
- Jul 2009
- Location
- Charlotte, NC
- Posts
- 380
Wait until the new N2 PCG's come out. I think it may be towards the end of the month.
Originally Posted by desert guy
-
03-08-2013, 08:49 AM #3
Regular Guest
- Join Date
- Mar 2007
- Posts
- 250
The FX-PCG1611 will work just fine. Though I'm not sure they have the same UL rating that the MS-FEC1610 you are replacing it with. Originally Posted by desert guy
His FEC he is replacing is Bacnet MS/TP. Doubt he would want to throw an N2 device on there. Originally Posted by ControlY0urMind
-
03-08-2013, 08:55 AM #4
Professional Member
- Join Date
- Oct 2009
- Posts
- 496
The PCG1611 will work. Do you have the caf file from the FEC? If you do just recreate the program using PCT, if not you would have to recreate and recommission the program.
Reply With Quote
