Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    632

    What's the procedure to replace a JCI FEC with a PCG?

    I have an FEC 1610 that died whats the best solution for replacement?
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

  2. #2
    Join Date
    Jul 2009
    Location
    Charlotte, NC
    Posts
    423
    Quote Originally Posted by desert guy View Post
    I have an FEC 1610 that died whats the best solution for replacement?
    Wait until the new N2 PCG's come out. I think it may be towards the end of the month.

  3. #3
    Join Date
    Mar 2007
    Posts
    363
    Quote Originally Posted by desert guy View Post
    I have an FEC 1610 that died whats the best solution for replacement?
    The FX-PCG1611 will work just fine. Though I'm not sure they have the same UL rating that the MS-FEC1610 you are replacing it with.



    Quote Originally Posted by ControlY0urMind View Post
    Wait until the new N2 PCG's come out. I think it may be towards the end of the month.
    His FEC he is replacing is Bacnet MS/TP. Doubt he would want to throw an N2 device on there.

  4. #4
    Join Date
    Oct 2009
    Posts
    593
    The PCG1611 will work. Do you have the caf file from the FEC? If you do just recreate the program using PCT, if not you would have to recreate and recommission the program.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event