Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2012
    Location
    Western KY
    Posts
    1,221

    ED040. Long time no see

    No question or issue. Just finished replacing dump valve on one of these old beauties. Gave it a good cleaning and she is off to the races agin. Cycle times are a little long but hey she's 26 years old and still making perfect cubes. Cut my teeth on these back in the day. Nice to see one still getting it done.

  2. #2
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,078
    The E-Series was the last of the R12 machines before the big switch to R502. It was also the last of the old siphon flush...at least for the bigger machines.

    As I recall, there was a mid-production change from the siphon system to the dump valve. Here's a retrofit kit they had to convert the older ones:

    762307.pdf

  3. #3
    Join Date
    Jul 2012
    Location
    Western KY
    Posts
    1,221
    As far as I could tell except for the float valve its all original. Still got the R-12 sticker on the comp. found it in a church kitchen. Donated to them a few years ago.

  4. #4
    Join Date
    Dec 2006
    Location
    In a Mess
    Posts
    992
    i remember those haha... was it that gawd awful brown/woodgrain colour?

    I miss cubers, its been a while!
    Sig removed by mod. G-Rated site

  5. #5
    Join Date
    Dec 2010
    Location
    Savannah Ga.
    Posts
    36
    I was wondering if there were any of those still around working! I too cut my teeth on those and the C models before them. Haven't come across one still working in many years!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event