+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 21 to 26 of 26

Thread: mini-mag shake light

  1. #21
    Join Date
    Dec 2007
    Posts
    13,231
    Post Likes
    My coworker and I bought the Terralux 180, from Johnstone, and have the same issue.

    I have a thread on here somewhere about the quality of battery being used as a possible cause. I know for a fact that some are shorter than others, thus the spring stretch trick works.

    I was also told that the battery life on this is 4 hours MAX, more like 2 with constant use.
    The Food Stamp Program, administered by the U.S. Department of Agriculture, is proud to be distributing the greatest amount of free meals and stamps EVER.
    Meanwhile, the National Park Service, administered by the U.S. Department of the Interior, asks us to "Please Do Not Feed the Animals". Their stated reason for this policy "... the animals become dependent on handouts and will not learn to take care of themselves."
    from an excerpt by Paul Jacob in Sun City, AZ

  2. #22
    Join Date
    Feb 2012
    Location
    Chile
    Posts
    1,591
    Post Likes
    For a solid el-cheapo that's priced to be disposable, in an earlier thread, someone (2sac?) mentioned TrustFire S-A2 Cree XPC-WC-Q5.. $15 price range on e-bay, was a bit cheaper on dealextreme (search by sku 36358). Small, 230 lumens, 3 modes (100%, 50%, strobe), can take some hits, doesn't need to be shaken to work, sturdy construction, runs on either AA or 14500 lithium batteries. The only issue is that they're made in China.

  3. #23
    Join Date
    Jan 2010
    Posts
    79
    Post Likes
    Pulling the spring is a temporary fix. If it's the old style mag light you'll notice it puts a little dimple in the positive end of the battery, causing poor contact. I had the new one with the three battery holder that slides in and didn't have an issue for months. I lost it and bought a replacement and this one acts up. Go figure.

  4. #24
    Join Date
    Jul 2003
    Location
    Orange County N.Y.
    Posts
    1,186
    Post Likes
    Quote Originally Posted by viceman View Post
    i bought a mini mag light yesterday. first one i have bought in a LONG time. the old ones never seemed to work with the bulb. always had to shake and tap them to get them to work. the NEW one has a LED. bright, sleek and......................


    i have to shake it to get it to work. new out of the box. somethings never change.
    Bad ground, haha. Hey make sure that you read the directions on the LED MiniMag lights as they do some things that most aren't aware of.

    Turn it on and you have full power, on-off-and on again you have 1/2 lumens, on-off-on-off-on and you have a flashing flashlight, on-off-on-off-on-off-on and you have an S O S signal flashing light. I've had mine for 2 years and was just shown this the other day.

    ...Ron
    Roof Rat

  5. #25
    Join Date
    May 2007
    Location
    Atlanta area
    Posts
    9,749
    Post Likes
    I put a small glob of vaseline on the battery holder contact. Works great.

    This also works on volume controls and other types of variable resistors that have spotty contact. Put a tiny glob on the resistor strip of the potentiometer. If you listen to a radio that sputters loudly when you turn the volume knob, the vaseline will eliminate the noise.

    Also works on car battery cable-to-clamp connections. Clean the cable end with a tooth brush and baking soda paste, rinse, dry with a hair dryer or a butane lighter, then coat with vaseline. Sometimes a corroded battery cable is all that's keeping keeping your battery from recharging or your car from starting.

    When working with car batteries, remember that they emit pure hydrogen when recharging. Keep ignition sources away.

    (http://en.wikipedia.org/wiki/Electrolysis_of_water)
    Vacuum Technology:
    CRUD = Contamination Resulting in Undesirable Deposits.
    CRAPP = Contamination Resulting in Additional Partial Pressure.

    Change your vacuum pump oil now.

    Test. Testing, 1,2,3.

  6. #26
    Join Date
    Mar 2013
    Location
    Joplin,Missouri
    Posts
    310
    Post Likes
    I never seem to have trouble with my mag lites I have a mini and a 2D guess I just got lucky has them both a couple of years

+ Reply to Thread
Page 2 of 2 FirstFirst 12

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •