Andover Database Coruption
I recently had to reinstall Continnuum 1.81 because of a virus infected computer. The lates backup was made during the infection. When restoring the databes could not get Continuum to run with it. I had to use an older backup which did not have all the objects that were added since the older backup. These objects included Numerics and Pograms in the Netcontroller and the i2920's for the air handlers. I had thought when you do a "Send to Database" it would pull the objects from the controllers and load the database with them. That did not happen and the error I receive in the Distribution Properties is
2/26/2013 8:42:27 AM The operation 'Save to Database' is finished.
2/26/2013 8:42:27 AM Unable to save objects to the database from Id:0.
The Controller was Reset. Unable to save objects to the database.
2/26/2013 8:42:27 AM The operation 'Save to Database' is starting.
The question is can the database be reloaded with the missing objects or do I have to remake those object and send them to the controllers.
Tags for this Thread