I'm trying to replace my old heat pump thermostat. However, i can't get any cool. When you call for COOL, it stucks on HEATING mode. Whenever I call for HEAT, it just stays there: no fan (AUTO mode), compressor doesn't kick in.
--- Heat pump terminals (R,O,Y,G)----
R connects to RED (24vpower)
O connect to BLUE wire (rev)
Y connects to YELLOW (cool)
G connects to G (fan)
(There is no WHITE (heat) wire!!)
New thermostat has R (Rh/Rc jumped), Y, C, O/B (W), G
Thanks for your help!!!
and, this is in tech2tech for what reason
might want to READ those rules you agreed to when you signed on this site.
It`s better to be silent and thought the fool; than speak and remove all doubt.
This is not a DIY site. It's time to admit you need a pro.
need a pro? The compressor isn't dead yet. It has to do with some wires. Well! Maybe I'm wrong! Is HVAC-Talk's purpose is here to help??
Originally Posted by kdean1
No personal feeling though! just my opinion
The purpose of this site is to employ a way for those in this industry to share information. Although we will do our best to help homeowners... this site is not meant for DIY. Wiring is a DIY issue.
Sorry but it is against the rules to show you how to wire your stat due to several other issues besides the DIY rule.
Other sites take on this liability, we can not.
Originally Posted by soidenkhongrang
2. Do-It-Yourself (DIY) - not here.
This site is for industry professionals and folks seeking HVAC/R advice and knowledge. Please do not ask for step by step instructions on purchasing, installing or repairing your own equipment. This is our job and our livelihood. We are generous, but not to a fault.
Questions of this type will not be answered and may be deleted at the discretion of the Moderators.