Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2013
    Posts
    2
    Post Likes

    LuxPro Thermostat

    On a LuxPro thermostat, one of the terminals, labeled R. It says "transformer, switched side, single source" in the manual as the typical connection. Does that mean its the power connection?

  2. #2
    Join Date
    Nov 2004
    Location
    SW FL
    Posts
    6,663
    Post Likes
    LuxPro provides several t-stats.

    BUYER BEWARE...
    it's not hard to destroy an Expensive control board
    when redoing wiring or changing out t-stats.
    Designer Dan
    It's Not Rocket Science, But It is SCIENCE with "Some Art". ___ ___ K EEP I T S IMPLE & S INCERE

    Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities

  3. #3
    Join Date
    Feb 2013
    Posts
    2
    Post Likes
    its an old psmh45 with mercury.

  4. #4
    Join Date
    Nov 2004
    Location
    SW FL
    Posts
    6,663
    Post Likes
    Quote Originally Posted by raleighgirl86 View Post
    its an old psmh45 with mercury.
    You most likely need Pro assistance with a replacement.

    Honeywell RTH230 or similar
    http://www.honeywellcentral.com/prod...mostat-rth230b

    Owner beware.
    http://www.luxproproducts.com/support.html
    Designer Dan
    It's Not Rocket Science, But It is SCIENCE with "Some Art". ___ ___ K EEP I T S IMPLE & S INCERE

    Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event