Results 14 to 19 of 19
Thread: Couple from this week
-
02-25-2013, 08:22 PM #14
Professional Member
- Join Date
- Jul 2007
- Location
- Chicago IL
- Posts
- 165
Sorry about the confusion. I thought the condenser was already live. That's what was throwing me off.
-
02-25-2013, 10:23 PM #15
Professional Member*
- Join Date
- Jul 2000
- Location
- Northern Wisconsin
- Posts
- 1,568
All they need for that condenser is one of those old square coal/wood gravity furnaces grates/registers.
Use the biggest hammer you like, pounding a square peg into a round hole does not equal a proper fit.
-
02-28-2013, 06:53 PM #16
Well that condensing unit is safe. You will need a skill saw to get that out
" dirty filter??!!! Buts its only 2 years old"
-
02-28-2013, 07:05 PM #17
Professional Member
- Join Date
- Mar 2008
- Location
- NC
- Posts
- 1,333
-
03-16-2013, 11:49 PM #18
Regular Guest
- Join Date
- Mar 2013
- Posts
- 9
It worries me that I have walked up to a unit not knowing if power could be feeding through the metal casing of the unit and the service disconnect. But seeing pics like that make me a little more cautious.
-
03-17-2013, 02:32 AM #19
Professional Member
- Join Date
- Feb 2013
- Location
- Phoenix, AZ
- Posts
- 188
That's not even correct for parallel feeders, note that the red and black from one cable goes to the same terminal, and same for the other. This means that there is no return path for current going back through the conduit bushing. This is the same as a load conductor passing through a CT - it induces current in the bushing, which acts like a shorted turn and heats up. I have seen this same situation on parallel feeders to a chiller (800A bus) melt the bushing! In this case with the much lower current it would probably not get that warm, but it's still bad, legality notwithstanding....


Reply With Quote
