Results 1 to 4 of 4
Thread: LuxPro Thermostat
-
02-25-2013, 03:30 AM #1
New Guest
- Join Date
- Feb 2013
- Posts
- 2
LuxPro Thermostat
On a LuxPro thermostat, one of the terminals, labeled R. It says "transformer, switched side, single source" in the manual as the typical connection. Does that mean its the power connection?
-
02-25-2013, 03:47 AM #2
Professional Member*
- Join Date
- Nov 2004
- Location
- SW FL
- Posts
- 5,260
LuxPro provides several t-stats.
BUYER BEWARE...
it's not hard to destroy an Expensive control board
when redoing wiring or changing out t-stats.Designer Dan
It's Not Rocket Science, But It is SCIENCE with "Some Art".
Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities
-
02-25-2013, 03:53 AM #3
New Guest
- Join Date
- Feb 2013
- Posts
- 2
its an old psmh45 with mercury.
-
02-25-2013, 05:24 AM #4
Professional Member*
- Join Date
- Nov 2004
- Location
- SW FL
- Posts
- 5,260
You most likely need Pro assistance with a replacement.
Originally Posted by raleighgirl86
Honeywell RTH230 or similar
http://www.honeywellcentral.com/prod...mostat-rth230b
Owner beware.
http://www.luxproproducts.com/support.htmlDesigner Dan
It's Not Rocket Science, But It is SCIENCE with "Some Art".
Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities
Reply With Quote