Results 1 to 6 of 6

Thread: Gas train

  1. #1
    Join Date
    Jan 2007
    Location
    maine
    Posts
    790

    Gas train

    Hey guys ran into a unit with a gas train in not familiar with. The first blocking valveis leaking at the solenoid. I either nerd to replace the valve or repair. I have no clue where to start and found no manufacture. I have about 20 different numbers off the valve if needed.
    Attached Images Attached Images  

  2. #2
    Join Date
    Dec 2006
    Location
    new england
    Posts
    630
    Did you try the manufactorer of the furnace?
    Chaos equals cash$$$

  3. #3
    Join Date
    Jan 2007
    Location
    maine
    Posts
    790
    Yep they were useless. They said hey don't keep info of units older then 5 years.. Great service on there part

  4. #4
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    1,390
    seems like there are two choices, 1-replace the whole unit,just tell the customer that parts are not longer available.2- re-engineering the gas train, with non OEM parts at your own risk. I would choose #1.

  5. #5
    Join Date
    Jan 2007
    Location
    maine
    Posts
    790
    Can't find any parts is my issue no one knows what this is

  6. #6
    Join Date
    Mar 2011
    Location
    Canada
    Posts
    150
    i've seen it. we had one shipped in from ireland on a blast furnace for making Glass. u might be able to get a Dungs or Siemans valve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event