Results 1 to 6 of 6
Thread: Gas train
-
02-20-2013, 08:54 PM #1
Professional Member
- Join Date
- Jan 2007
- Location
- maine
- Posts
- 781
Gas train
Hey guys ran into a unit with a gas train in not familiar with. The first blocking valveis leaking at the solenoid. I either nerd to replace the valve or repair. I have no clue where to start and found no manufacture. I have about 20 different numbers off the valve if needed.
-
02-21-2013, 05:36 PM #2
Professional Member
- Join Date
- Dec 2006
- Location
- new england
- Posts
- 481
Did you try the manufactorer of the furnace?
Chaos equals cash$$$
-
02-24-2013, 11:12 AM #3
Professional Member
- Join Date
- Jan 2007
- Location
- maine
- Posts
- 781
Yep they were useless. They said hey don't keep info of units older then 5 years.. Great service on there part
-
02-24-2013, 12:23 PM #4
Regular Guest
- Join Date
- Nov 2004
- Location
- Western NY
- Posts
- 984
seems like there are two choices, 1-replace the whole unit,just tell the customer that parts are not longer available.2- re-engineering the gas train, with non OEM parts at your own risk. I would choose #1.
-
02-24-2013, 05:15 PM #5
Professional Member
- Join Date
- Jan 2007
- Location
- maine
- Posts
- 781
Can't find any parts is my issue no one knows what this is
-
02-26-2013, 08:02 PM #6
Professional Member
- Join Date
- Mar 2011
- Location
- Canada
- Posts
- 108
i've seen it. we had one shipped in from ireland on a blast furnace for making Glass. u might be able to get a Dungs or Siemans valve
Reply With Quote
