H10PM leak detector help
Anyone out there with an H10PM leak detector mind giving me the part number from their wall charger?
3015-0131 that will allow running the unit from the 120V and charge battery.
3015-0119 that is the charger only, will not run unit if battery is low.
From the Bacharach book.
If a day goes by and you have learned nothing, I hope you got a lot of sleep.
Thanks GT and newoldtech.
Just ordered it from Century Tool. Is that little red ball in the head an indication that the pump is working? Just curious.
Last edited by cajunhvac75; 02-15-2013 at 11:22 AM.
I actually returned mine because of that. Then the replacement one also didn't float. According to the instructions it is suppose to float. I called tech support and they assured me that the red ball didn't have to float in the newer models for the pump to be working. They also told me that they were going to change the instructions to reflect that. I haven't used it much yet, but it seems to working OK.
Originally Posted by cajunhvac75
Two other techs and myself have all bought these in the last year and none of our balls float and the leak detectors work just fine, so that would seem to support what tech support is saying.
Originally Posted by newoldtech
Sent from my SGH-I747M using Tapatalk 2
I don't think my balls float either. But then again I haven't called tech support yet!
Originally Posted by BALloyd
The picture in my avatar is of the Houston Ship Channel and was taken from my backyard. I like to sit outside and slap mosquitos while watching countless supertankers, barges and cargo ships of every shape and size carry all sorts of deadly toxins to and fro. It's really beautiful at times.....just don't eat the three eyed fish....
¯`·.¸¸ .·´¯`· .¸>÷÷(((°>
`·.¸¸..· ´¯`·.¸ ¸.·´¯` ·.¸>÷÷(((°>