Results 1 to 9 of 9
Thread: micron guage
02-15-2013, 07:11 AM #1Regular Guest
- Join Date
- Apr 2005
- somewhere out there
I have a old supco micron guage, looking to upgrade been looking at a jb and infinicon . Any problems with these. The yellow jacket in the hard case looks nice but pricey.
02-15-2013, 08:18 AM #2
BluVac beats all of those, and is on sale at Truetechtools.If more government is the answer, then it's a really stupid question.
02-19-2013, 11:01 PM #3Professional Member
- Join Date
- May 2008
- Collinsville, Tx (Texoma)
The JB is terrible, I went with the Yellow Jacket, it is the most reliable on the market. Most of the techs at the company I work for use them on anything from small RTU's up to big Centrifugals. Just keep the oil out of the sensor.
02-19-2013, 11:24 PM #4
02-19-2013, 11:56 PM #5
yellow jacket is my choice.....it was working.... played with it.... now its broke.... whats the going hourly rate for HVAC repair
02-20-2013, 01:54 AM #6Professional Member
- Join Date
- Feb 2011
- Orange County, in a Galaxy far far away...
Blue vac is very nice, I hear lots of good things about them. Yellow jacket with the blue hard case is what I have and it's excellent.
Shop around and chat to supply houses, you can get them for $285 ish.
Once you get to see a 500 micron vacuum you're wondering why isn't everyone doing it?
02-20-2013, 08:09 AM #7
Yellow jacket for me also
Sent from my SGH-T999 using Tapatalk 2
02-20-2013, 10:33 AM #8
In the past I just felt like these things were disposable. Just had the worse of luck with digital micron gauges. Owned probably seven from numerous different YJ models (not bad), the gray Supco (longest lasting of the bunch), JB (crap), Robinaire (crap), etc. They would do great for a season, then just get unreliable, erratic, or just die. I would do the whole alcohol cleansing ritual and wish for the resurrection to take place, but just ended up throwing them in a box. Went back to my old true Thermal Engineering, which never let me down until last season when I dropped it off a roof.
I read all about the BlueVac and all the hoopla and ado here in the tool section and decided to give that a try. I liked the fact the owner is a member here on the site that he cares about his product and stands by it. Kind of like FieldPiece or DigiCool, I may not be the biggest fan of their product, but since the main guys are here in the forums and support us all on a personal level, I will purchase their product over another. So purchased it and found that I was taken to a whole new dimension of the world of vacuum. I think it is a marvelous and ingenious device, and thoroughly love actually seeing what is going on as for the entire scope of the vacuum process. Now how long it lasts, time will only tell, going on 8 months and use it heavily year round in refrigeration.....so knock on wood.
04-18-2013, 09:50 PM #9Professional Member
- Join Date
- Jul 2011
- Lehigh Valley, PA
Is the Field Piece vacuum meter a good tool and accurate? I need a new tool.
I used Fredricks meters & probes in the past for high vac work on cryogenic equipment. Little overkill for use here. I regularly pulled vacuums to 10 microns with my Edwards pump, dow corning vacuum grease & large diameter hoses wrapped around pipe nipples screwed into large valves on the tanks. But I need something for refrigeration repairs work.