Results 1 to 3 of 3

Threaded View

  1. #1
    Join Date
    Feb 2006
    Location
    michigan
    Posts
    177

    Help with Trane RTU controller replacement

    Good evening,

    I have a co worker that visited a site today. The main controller down in the church that has all the temperature adjustments,night setback and scheduling went bad today. The replacement from Trane is over $$$$ our cost. The customer would like to go to a simple programmable thermostat and remote sensor. I know on some of the Voyager equipment, that you could put in a CTI board and allow it to work with a conventional stat. At this point, I don't think the customer would care if we used a Trane or conventional stat. This is a constant volume unit for a larger church with 4 stg cool, 3 stg, heat, economizer.
    Any assistance or advice would be appreciated. The customer is budgeting for a replacement RTU but has to get heat in the building until they have they have it in the budget.


    Model # SFHCC601HJ10C78D1D01EFTX
    Serial# J89H72421
    Last edited by Chris_Worthington; 02-11-2013 at 08:09 PM. Reason: Pricing Removed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event