Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2009
    Posts
    644

    lon discover in nae

    I was able to add a device manually and commission it through workbench. The device came online in the nae but niw I cant add points. Im looking for the mcquay whpe3b xif file. If I add that to the nae will I be able to discover the points?

  2. #2
    Join Date
    Oct 2009
    Posts
    644
    Whpe3b is the number on the echelon board, but when I bring it in through niagara module://lonMicrotech/Whpe1B.lnml is used as the XML file. Is there a way to convert this back to an XIF or extract the lnml out of workbench?

  3. #3
    Join Date
    Oct 2009
    Posts
    644
    Ok I was able to find the right file and add it as a resource file to the nae. After I did a reboot to the nae it was able to discover the points in the heatpump.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event