Results 1 to 6 of 6
Thread: Solenoid valve
02-06-2013, 08:54 AM #1
So guys what are a good quality long lasting 24volt 3/4 inch sweat solenoid valve's. I am going to have to replace a lot this summer and want a good quality one. Any suggestions appreciated.
Sent from my BlackBerry using Tapatalk please excuse typographical errorsIf you can not do it right, Why even do it at all?
02-06-2013, 02:11 PM #2
02-06-2013, 02:48 PM #3
what i have its a multi story building that has several 3/4 inch sweat solenoid valve's and circuit setter. I have installed a few taco erie vt2313g13a02a...2way 24 volt. this style i replaced a few about a year ago and they have had a couple fail all ready, and before i change out whole building i want something that will work well with years of good service i hope. I run 180 degree water and max pressure is 110 psi on the lower floors and of course much less at the top of this multi story building. I been asking around to some local supply house's and they seem to suggest taco or honeywell but i wanted some real world experience from everyone here before i make a decision.If you can not do it right, Why even do it at all?
02-12-2013, 08:11 PM #4
02-12-2013, 08:35 PM #5
02-13-2013, 06:02 AM #6
I like Taco. Easy to change out a power head, and easy to rebuild when/if needed.Contractor locator map
How many times must one fix something before it is fixed?