Results 14 to 26 of 30
Thread: Suction Line Inverted Loop
-
02-05-2013, 04:34 PM #14
Regular Guest
- Join Date
- Feb 2013
- Posts
- 8
I don't think you understand what I did. I just bought the equipment. I hired a local contractor to disconnect the existing equipment. I put the the coil in the attic and did the ductwork and drain plumbing. Then the contractor came back and hooked everything up and started it up. I already asked him about the loop. I was just looking for a second opinion.
-
02-05-2013, 07:27 PM #15
Did he reuse the old line set? Did it have an inverted loop.
-
02-05-2013, 07:43 PM #16
Regular Guest
- Join Date
- Feb 2013
- Posts
- 8
-
02-05-2013, 08:10 PM #17
The inverted trap requirement has been around for a long long time. Does your line set rise higher then your coil at any point. Does the line set have any incline before it goes outside.
-
02-05-2013, 08:22 PM #18
Professional Member*
- Join Date
- May 2006
- Location
- Austin, Texas
- Posts
- 188
Had a local inspector tell me I would have issues with oil return because of inverted trap. Showed him the installation manual. He did not have much else to say about it.
-
02-05-2013, 08:48 PM #19The picture in my avatar is of the Houston Ship Channel and was taken from my backyard. I like to sit outside and slap mosquitos while watching countless supertankers, barges and cargo ships of every shape and size carry all sorts of deadly toxins to and fro. It's really beautiful at times.....just don't eat the three eyed fish....
¯`·.¸¸ .·´¯`· .¸>÷÷(((°>
`·.¸¸..· ´¯`·.¸ ¸.·´¯` ·.¸>÷÷(((°>
.·´¯`· .¸>÷÷(((°>
LMAOSHMSFOAIDMT
-
02-05-2013, 09:23 PM #20
That means a portion of this job is DIY.
You went cheap & bought the equipment to save a few bucks (and have no warranty BTW). I'm betting the only thing the "installer" did was connect lineset & charge.
Have him explain it to you & correct it if need be.
You won't get much help here for internet purchased equipment.Always drink upstream from the herd
-
02-05-2013, 10:27 PM #21
Regular Guest
- Join Date
- Feb 2013
- Posts
- 8
I have had lots of internet discussions, but I've never met any ruder people than some on this thread. I've rather come to expect this from HVAC people though. They seem to think selling and installing new equipment is their God given right. Well, I'm here to tell you it's not. I now have two of these systems installed and I'm sure they will they will last a very long time. The installed cost is less than half of what it would have cost if I'd have hired it all out, so it's not a minor deal to someone who doesn't have a lot of money. So you who think you are entitled somehow to do what I can do for myself and charge me for the privilege, drop dead for all I care.
For those that had a helpful word or two thanks and best of luck to you. I'll not be back here ever.
-
02-05-2013, 10:49 PM #22
-
02-06-2013, 05:21 AM #23
-
02-06-2013, 08:33 AM #24
The reason one would use a contractor is to protect oneself from the liability of a catastrophy, also you could be hurt installing it which would probably also void your homeowners insurance. You have mistaken rudeness for brutal honesty, sometimes people don't hear very well when things are sugar coated.
Certified parts changer.
-
02-06-2013, 08:46 PM #25The picture in my avatar is of the Houston Ship Channel and was taken from my backyard. I like to sit outside and slap mosquitos while watching countless supertankers, barges and cargo ships of every shape and size carry all sorts of deadly toxins to and fro. It's really beautiful at times.....just don't eat the three eyed fish....
¯`·.¸¸ .·´¯`· .¸>÷÷(((°>
`·.¸¸..· ´¯`·.¸ ¸.·´¯` ·.¸>÷÷(((°>
.·´¯`· .¸>÷÷(((°>
LMAOSHMSFOAIDMT
-
02-06-2013, 08:49 PM #26
Professional Member*
- Join Date
- May 2006
- Location
- Austin, Texas
- Posts
- 188
Allows liquid to boil off.



Reply With Quote