Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2010
    Location
    Tampa, FL
    Posts
    101

    Trane shaft nut sockets.

    I have 2 sockets for Trane centrifical shaft nuts, AN12 and AN22. They a 1/2 drive and are used for tightening shaft nuts with an impact gun. Much better than hammering on the end of a spanner and maybe missing and damaging an impeller. The small socket works on nuts with 3 or 4 dogs. These were built by a machinist and will last many years. Pics if interested.

  2. #2
    Join Date
    Mar 2007
    Posts
    3,063
    Quote Originally Posted by deltap10 View Post
    I have 2 sockets for Trane centrifical shaft nuts, AN12 and AN22. They a 1/2 drive and are used for tightening shaft nuts with an impact gun. Much better than hammering on the end of a spanner and maybe missing and damaging an impeller. The small socket works on nuts with 3 or 4 dogs. These were built by a machinist and will last many years. Pics if interested.
    SOLD!
    "There is no greater inequality than the equal treatment of unequals."

    -Thomas Jefferson

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event