Results 1 to 2 of 2
  1. 02-04-2013, 01:24 PM #1
    deltap10
    deltap10 is offline Professional Member
    Join Date
    Jun 2010
    Location
    Tampa, FL
    Posts
    96

    Trane shaft nut sockets.

    I have 2 sockets for Trane centrifical shaft nuts, AN12 and AN22. They a 1/2 drive and are used for tightening shaft nuts with an impact gun. Much better than hammering on the end of a spanner and maybe missing and damaging an impeller. The small socket works on nuts with 3 or 4 dogs. These were built by a machinist and will last many years. Pics if interested.
    Reply With Quote Reply With Quote
  2. 02-04-2013, 02:21 PM #2
    Tech Rob's Avatar
    Tech Rob
    Tech Rob is offline Professional Member
    Join Date
    Mar 2007
    Location
    Home of the newly wed and the nearly dead
    Posts
    2,938
    Quote Originally Posted by deltap10 View Post
    I have 2 sockets for Trane centrifical shaft nuts, AN12 and AN22. They a 1/2 drive and are used for tightening shaft nuts with an impact gun. Much better than hammering on the end of a spanner and maybe missing and damaging an impeller. The small socket works on nuts with 3 or 4 dogs. These were built by a machinist and will last many years. Pics if interested.
    SOLD!
    Truth is still truth, even if no one believes it. A lie is still a lie, even if everyone believes it.

    "It's called the american dream because you have to be asleep to believe it" -George Carlin

    "A nation of sheep begets a government of wolves" -Edward R. Murrow

    "I have problems just like you. One time, my dancing horse almost fell into my car elevator" -Mitt Romney

    Buy american made goods & support locally owned businesses!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules