Results 1 to 3 of 3
Thread: Trane eware/tuc help!!!
02-04-2013, 12:09 PM #1
Trane eware/tuc help!!!
So I have an old trane vuv unit ventilator with a trane tuc control board. I have the trane rover v6 service tool on my laptop. Is there a way to communicate to the tuc using the rover service tool? If so what terminals do I connect to on the tuc board? I provided a picture of the board. Thanks."The bitterness of poor quality remains long after the sweetness of low price is forgotten". --Benjamin Franklin
02-04-2013, 06:14 PM #2
WOW, you're going way back. I work on TUC's so infrequently that I never remember how to get them to communicate, there's a little dance you have to do and some button pushing and DIP switch switching that needs to take place before they will talk. I'll try to find an IOM, post the serial # of the unit and if I don't have it I'm sure someone will find it for you.Saving the world...one service call at a time.
02-04-2013, 06:27 PM #3
Thanks for the feedback. I was able to locate the iom online and find the methods of putting the unit into a local test mode, but I need to view some sensor readings and make some configuration changes.