Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2008
    Location
    West Monroe, LA
    Posts
    69

    York YLAA0070 Chiller Compressor Problems

    We had a York 70 ton chiller installed on a closed loop chilled water system about two years ago at my plant. This chiller has a total of two circuits and each circuit has three compressors. Within the first six months we lost two compressors and JCI came out and warrantied the compressors. Now a little over a year and half later one of the same compressors is bad again along with a new one. I am just curious if there is any precautions we should take before throwing a lot more money into the system and getting two new replacement compressors. We only had a one year warranty so the bill is on us now.

  2. #2
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,457
    what caused the failures? how many starts and run hours on each compressor? application? got a complete log sheet?
    How to make the perfect "Half-Hitch" knot or any other boyscout knot in 3 easy steps...

    1. Remove your meter leads from the meter and very carefully return them to their storage case or bag.
    2. Wait 2 seconds
    3. Very carefully remove your meter leads from their storage place and enjoy your new knot!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event