Originally Posted by
troyport
I saw in the manual where it talks about a trap.. The lines will rise about a foot from the HP to where it enters the house, where it will stay at that level (even height with the "ceiling" of the basement) then turn and drop vertically to the evap then turn again into the evap. I am envisioning 3 long sweep elbows, plus the turn directly into the evap, plus that "s" outside as it rises up to enter the house, like the current system. 2 of the long sweep elbows could be eliminated if the line runs on an angle relative to the floor joists, but that will not look too professional. Do you guys hate guys like me when you do an install?