Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    May 2011
    Location
    North Carolina
    Posts
    318
    Post Likes

    varitrac comfort manager cable

    I am trying to connect to an old varitrac (don't know if its a I or II). I have found lots of post of baude rates and flow control and the like. When we ordered the connectors for the varitrac board (it's a 25 pin on the board) to the 9 pin serial port on the computer Trane said the cable was no longer available. Does anyone know what the pinout or what type of cable is needed so I can make one?

    Is it a null modem cable?

    In the lower left corner of the board by the 25 pin connector there is a lable with the number 50100691 Rev 2 if that's of any use.

  2. #2
    Join Date
    Sep 2002
    Location
    Hampton Roads, Virginia
    Posts
    1,683
    Post Likes
    You have mail
    When you talk, you are only repeating what you already know. But if you listen, you may learn something new. - Dalai Lama


  3. #3
    Join Date
    May 2011
    Location
    North Carolina
    Posts
    318
    Post Likes
    Got it! Many thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event