Page 1 of 2 12 LastLast
Results 1 to 13 of 24

Hybrid View

  1. #1
    Join Date
    Dec 2003
    Location
    Salisbury, MD.
    Posts
    1,473

    Goodman GMS 80 3 blinks

    Check out this installation. See any issues with the flue? This is in my neices house in jersey and its locking out on pressure switch stuck open.
    Attached Images Attached Images  

  2. #2
    Join Date
    Nov 2009
    Location
    Northwest Illinois
    Posts
    275
    I had a Goodman do that the other day, I could hear the switch pull in but the contacts were not making, I checked all the obvious stuff just to make sure, then put it a new switch. Works fine now.

  3. #3
    Join Date
    Jul 2012
    Location
    Cincinnati ohio
    Posts
    252
    Quote Originally Posted by stay gold jonny View Post
    I had a Goodman do that the other day, I could hear the switch pull in but the contacts were not making, I checked all the obvious stuff just to make sure, then put it a new switch. Works fine now.
    X2

  4. #4
    Join Date
    Jan 2007
    Location
    N.E. Ok.
    Posts
    1,363
    You should tell your Neice to turn the gas off with the cut off and immediately find a different contractor to take a look at the flue and correct it.

  5. #5
    Join Date
    Mar 2001
    Posts
    1,482
    Wall of shame fodder
    One way to outthink people is to make them think you think. They'll think you're not really thinking what you're trying to get them to think you think...........

  6. #6
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    292
    induce draft tied to a convection water heater, some people just dont get it
    (((PEACE IS THAT BRIEF MOMENT IN HISTORY WHERE EVERYBODY STANDS AROUND RELOADING)))

  7. #7
    Join Date
    Dec 2003
    Location
    Salisbury, MD.
    Posts
    1,473
    This is a condo with a bunch of units done exactly the same way. Why is it that his trade is so full of incompetent contractors playing with peoples safety? Look at the wall of shame and see how much is really out there. Maybe I can find out who the contractor is that did the work and threaten to sue them for not following any decent codes or safety regulations. You would think the gas company might have wanted to inspect the work before they energized the gas line.

  8. #8
    Join Date
    May 2006
    Posts
    373
    You don't energize a gas line thats power
    You presserize a gas line

  9. #9
    Join Date
    Feb 2006
    Location
    USA
    Posts
    4,381
    What's with the Tee in the relief valve piping?

    Sent from my SGH-T999 using Tapatalk 2

  10. #10
    Join Date
    Dec 2003
    Location
    Salisbury, MD.
    Posts
    1,473
    I'm not sure what that is either. I have never been to the house and only see the same pic your seeing.

  11. #11
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    67,765
    Vacuum breaker for the line.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  12. #12
    Join Date
    Dec 2005
    Location
    Cincinnati, Oh
    Posts
    4,928
    Quote Originally Posted by beenthere View Post
    Vacuum breaker for the line.
    Yeah, because they tied it into the condensate line.

    What a bunch of dorks.
    "Better tell the sandman to stay away, because we're gonna be workin on this one all night."

    "Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."

    "Just get it done son."

    Dad adjusted

  13. #13
    Join Date
    Dec 2002
    Location
    Houston,Tx.
    Posts
    15,849
    Quote Originally Posted by hvacvegas View Post
    Yeah, because they tied it into the condensate line.
    Is that even legal? I have never in over 35 years seen that, but I know each local does things a little different. In Houston the inspector would probably ticket you for being on crack.
    __________________________________________________ _______________________
    “Experience is a hard teacher because she gives the test first, the lesson afterwards". - Vernon Law

    "Never let success go to your head, and never let failure go to your heart". - Unknown

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event