Results 1 to 2 of 2
  1. #1
    Join Date
    May 2007
    Posts
    760
    Post Likes

    R-22 to R-410a conversion; distributor nozzle sizing?

    When converting an evaporator from R-22 to R-410a and there's a distributor nozzle, do you replace the nozzle when the TXV is replaced? If so, what would be the effect of not replacing the nozzle?

    Sorry, never mind, Sporlan Bulletin 20-10 answered my question.

    Moderator, you are welcome to delete this post if you like.

    Thanks.

  2. #2
    Join Date
    Oct 2010
    Location
    Anderson, South Carolina, United States
    Posts
    10,558
    Post Likes
    If you're talking about the orifice/metering device (piston) it should be removed entirely if you're installing a txv.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Quality Home Comfort Awards