Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    East berlin, PA
    Posts
    279

    Stupid question about replace manual valve on Star Griddle 648M

    I am going to be replacing a the right side on-off valve on a Star Griddle, model 648M and I was wondering, since the valves are screwed into the top of the manifold and there is a bracket welded to it right beside the valve, how can the old valve be unscrewed when it will hit the bracket as I and unscrewing it. The same question would apply to putting a new one on. Am I supposed to disassemble the valve so it has room to get by and then reassemble it? This seems really stupid.... I must not be seeing something....
    "Delay is preferable to error"- Thomas Jefferson

  2. #2
    Join Date
    Oct 2008
    Location
    mid-Tennessee
    Posts
    582
    Disassemble it. Remove the orifice as well. That's often necessary when replacing valves on griddles and gas stoves. Then reassemble the new one properly. I generally reuse the original orifice.

  3. #3
    Join Date
    Dec 2012
    Location
    Illinois
    Posts
    147
    Yes. Most units are built this way. Remember, don't mix tapered plugs. Make sure the parts to back into the valve body they came out of. This is important.

    These valves come apart so they can be re-greased on a regular basis as preventive maintenance.

  4. #4
    Join Date
    Sep 2007
    Location
    British Columbia
    Posts
    13
    Put a little pipe dope on the tapered threads...helps guarantee no leaks...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event