Results 1 to 1 of 1
01-23-2013, 01:02 AM #1
Need help with Quadra fire Castile insert
Our quadra fire Castile insert had a catastrophic failure and caught fire into the hopper. After the fire we have removed the stove and have replaced the 3 snap switches, vacuum switch, feed motor, and combustion fan and all gaskets. Stove is still not working. The stove powers up, blue light flashes combustion blower starts , after a minute blue lights stop flashing but combustion continuously runs. Whe I turn stove to on the control box red light comes on and combustion fan increases speed the igniter powers up but auger does not turn at all. Please help with what to do next.