At least they sharpied the guage of the metal on it so you know what to use when it's redone
Sent from my SPH-L710 using Tapatalk 2
During a heater certification I came across another plenum by the fine installers at Ghetto HVAC. It's air tight however so they deserve that at least. Takes longer to it the wrong way, Who needs the right tools anyway!
At least they sharpied the guage of the metal on it so you know what to use when it's redone
The cost of all that RTV will soon cover the cost of a break
I dont warranty Tinkeritus
It might count as modern art. It looked like painters caulk up close.
Sent from my SPH-L710 using Tapatalk 2
I'd be more pissed about all of the crap that is around it.
Join http://scopeny.org/ Shooters Committee on Political Education
The world is full of sheep,try not to join the flock.
Support the Skilled Trades, Don't DIY
And I still wonder why people don't use cased coils...
Wait, don't all evap coils come in cases now adays? I kinda remember my dad telling me that back in the 80's you could get coils and enclose them.
looks like the drains piped into an overflow!
can't help but wonder, what that plenum does to the airflow.
It`s better to be silent and thought the fool; than speak and remove all doubt.
looks like the left side won't get air flow through the heat exchanger. Look closer to the drain ports and picture the coil and the panned off area.
As iron sharpens iron so one man sharpens another Proverbs 27:17 NIV84
wow is all i can say!!!! that coil is definately choked on air flow . it looks like they had plenty of clearance around
the coil and furnace to do it right.