Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    560

    Anything available to do Tenant Billing in Tridium

    We have an old LON Siebe system where the tenants can dial in via a program called Data Talk to enable occupancy, must be 24 hours in advance.
    We are going to install a Distech Jace and want to keep it as seemless as possible for the occupants and the Property Management company to do tenant billings too, so if anyone has some ideas I'm all ears.
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

  2. #2
    Join Date
    Jul 2009
    Location
    Charlotte, NC
    Posts
    419
    Tridium offers a Tennant Billing function.

  3. #3
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    560
    Can you tell me a little bit about it or where I can find some documentation on it? I did come across an app from HW called WEB-TSB-AX, wondering if they are similar.
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

  4. #4
    Join Date
    Mar 2007
    Posts
    145
    Checkout Web Smart Air. Telephone or web overrides and invoicing. Popular drivers for interfacing to JACE (BacNET, OPC, Modbus). www,WebSmartAir.com

  5. #5
    Join Date
    Apr 2007
    Location
    Southwest Riverside County CA
    Posts
    38
    TenantEye by Csi3 is popular and easy to set up.. Free 2 hr trial.. http://csicubed.com/portofolios/tenant-eye/

  6. #6
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    560
    Link didn't work.
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

  7. #7
    Join Date
    Apr 2007
    Location
    Southwest Riverside County CA
    Posts
    38
    Quote Originally Posted by desert guy View Post
    Link didn't work.
    Sorry just try http://csicubed then open products..

  8. #8
    Join Date
    Feb 2013
    Location
    Phoenix, AZ
    Posts
    198
    Quote Originally Posted by EMPadvocate View Post
    Sorry just try http://csicubed then open products..
    That doesn't work either (forgot the .com) Here's one that works:

    http://csicubed.com/portfolios/tenant-eye/

  9. #9
    Join Date
    Nov 2006
    Location
    Desert Southwest
    Posts
    560
    Yeah that always helps I had a couple of UPS units at a call center near Sky Harbor that were changed out today so a lot of hurry up and wait. Sure would have been nice to be outside today but I spent most of it indoors with two of my guys removing and reconnecting wires and showing them the ropes.
    After an 11 hour day I'll probably take a look at it tomorrow but thanks for the reply.
    If you can't fix it with JB Weld, Duct Tape, and Ty Wire it has to be replaced.
    No good deed goes unpunished.
    If you want to take off friday to go fishing then make sure you train your helper right.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event