Results 1 to 13 of 39
Thread: Does this bearing look ok?
01-21-2013, 05:14 PM #1
Does this bearing look ok?
First job for the new company was fixing this lol
01-21-2013, 05:22 PM #2
Looks a little dry.
01-21-2013, 05:27 PM #3Professional Member*
- Join Date
- Apr 2011
- Coastal Maine
That there is what we call a "Catastrophic Failure."
01-21-2013, 05:30 PM #4
"Well it was making some noise, but I didn't think anything of it....."
01-21-2013, 05:33 PM #5
Ya this was a big air handler at a grocery store, 8' long shaft two blowers, one was completely destroyed, I didn't even get to ride along today, just made me work lol
01-21-2013, 05:33 PM #6
At least you dont have to spend time getting the bearing off the shaft..
New bearings, get the shaft repaired, new wheel, and that Trane should be good to go..
01-21-2013, 05:34 PM #7
Oh and it blew the belts, not sure why so they put one and and fired it back up lol, the race was still stuck on it, there closing the store in 2 months, there building the new one as we speak.
01-21-2013, 05:34 PM #8
01-21-2013, 05:41 PM #9
01-21-2013, 05:49 PM #10
Those are the times you need coveralls and gloves to put on. You will go home black from head to toe......
01-21-2013, 05:56 PM #11
Ya it was a pretty messy deal, grease and dust everywhere, 12' In the air
01-21-2013, 06:16 PM #12
Keeping in mind I'm resi:
How in the heck did that tear through that metal plate!?!
That must be one freaking huge wheel."Better tell the sandman to stay away, because we're gonna be workin on this one all night."
"Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."
"Just get it done son."
01-21-2013, 06:19 PM #13