I have integrated an existing Ivu into a new Jace I just installed, Bacnet/IP. The Ivu has Carrier Comfort controllers on it. The programmable long stick types, not sure what they are called. Most points were already configures as network points so I was able to see them. A few others I had to check the box to make them “discoverable” to the Jace. The trouble I am having, is the proxied points into the Jace cannot be override or set points cannot be changed. I tried different types of proxy points, however they all turn stale, tan. I have to deleted and relearn the point to correct this. If I make changes in the Ivu the Jace correctly reflects them. I also made sure to release the over rides in Ivu before trying to change them through the Jace.