Water Furnace

[drife678]

New construction home with three zones.

[VTP99]

Got anymore pics ?
Belimo controls ?

[drife678]

sorry. only one i took. trying to upload some other jobs.

[gravity]

looks like the orange EWC's

[drife678]

belimos

[coens]

Looks Good!

[Jkb79]

I don't have much experience with water furnace, but I have a lot with geocomfort does this unit have a variable speed blower?

[drife678]

Yes

[Jkb79]

Well job looks very nice. One small thing though, the variable speed blowers require a min. Of 18 inches of the plenum height to be the same size as the opening on the top of the unit. The reason why is because the blower needs to have the resistance of the pressure of the duct as it try's to find the proper speed. The transition ( while nicely done) will not allow this to happen and you will experience harsh " huffing " noises and uneven airflow. This can cause the loss of capacity and motor damage. Other than that nice job.

[drife678]

We have thousands identical

[Jkb79]

Perhaps they use a different blower than geocomfort. I have also had the same problem on the climate masters. Last one I found was done with duct board and it sounded like someone was moving furniture around upstairs as it ran.

[drife678]

Lol

[drife678]

The zone panel controls 5 diff fan speeds most of the time its in low unless there's possible problem and electric heat is on then it flat gets it.