Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2013
    Posts
    13

    Connection PXC22.D

    hello
    I have a PXC22.D, the interface Echelon U10 and Xwork 4.10
    In NW Configurator when I try to connect to PXC22.D, I get an error message:
    "Can not open Lon device (LON1)
    Another program is using this device.Disconnect this program from the network"

    how can I fix it?

    Thanks

  2. #2
    Join Date
    Apr 2008
    Location
    UK
    Posts
    151
    Have you ever been able to connect with this interface to other PXC's or is this the first time you've tried it?

    I think I tried one of these devices previously with XWorks 2.37 and it didn't work, but that was a few years ago. I currently use a Gesytec but have also used a PCMCIA card with good results.
    -----------------------------------------------------
    Don't be a stupid dwarf. It's not big and it's not clever!

  3. #3
    Join Date
    Jan 2013
    Posts
    13
    Tis is the first time i tried it.
    The Loytec interface NIC709-USB100 ?

  4. #4
    Join Date
    Apr 2008
    Location
    UK
    Posts
    151
    I can confirm this device does work fine. we have a few people using them in the office. you need to go into advanced settings and select legacy mode. also a good idea to run it as a service

  5. #5
    Join Date
    Apr 2008
    Location
    UK
    Posts
    151
    here's a screen shot of the settings a colleage has set to get his NIC709-USB100 working with XWorks

    Name:  NIC-USB Legacy Settings.jpg
Views: 120
Size:  37.3 KB
    -----------------------------------------------------
    Don't be a stupid dwarf. It's not big and it's not clever!

  6. #6
    Join Date
    Jan 2013
    Posts
    13
    Thanks

  7. #7
    Join Date
    Jan 2013
    Posts
    13
    Name:  1.PNG
Views: 86
Size:  86.4 KB
    Hello
    i have the loytec interface NIC709-USB100 ,but when in Network Configurator I make Node setup and i search the device when i press configure i receive a error messenger " The bacnet device configuration failed!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event