Results 1 to 13 of 26
-
01-10-2013, 06:22 PM #1
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
96% 'er in FLORIDA....just because.
Only our second 90+ Furnace......
rip it up!
You can't learn a thing with your mouth open.
-
01-10-2013, 07:51 PM #2
Professional Member
- Join Date
- Aug 2012
- Location
- Palmyra MO
- Posts
- 198
feel sorry for the guy that has to check the evaporator coil in the future. vent pipes go out the side very easily to keep from blocking evaporator access panel. inducer motor rotates with three screws. intake can be taken out of either side as well.
-
01-10-2013, 07:53 PM #3
Professional Member*
- Join Date
- Feb 2009
- Location
- Tallahassee, FL
- Posts
- 4,441
Gee why would you put such a tiny filter grill on such a big box?
-
01-10-2013, 08:03 PM #4
Professional Member
- Join Date
- Jan 2004
- Location
- Here and there
- Posts
- 4,789
I dont care for the gas line
i belong to peta ... people eating tasty animals. all my opinions are just mine.
-
01-10-2013, 08:04 PM #5
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
Waiting for that question. 24x30 grille through the other side.
-
01-10-2013, 08:07 PM #6
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
Sorry about the gas line. That's the work of the only gas fitting sub I have. Copper is king around here.
-
01-10-2013, 08:09 PM #7
Professional Member*
- Join Date
- Feb 2009
- Location
- Tallahassee, FL
- Posts
- 4,441
Ok I knew there was something I couldn't see! Who would do that?
-
01-10-2013, 09:02 PM #8
Professional Member*
- Join Date
- May 2007
- Location
- Dry as a bone Tucson
- Posts
- 3,396
-
01-10-2013, 09:35 PM #9
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
Pipes are not screened, per preference of my lead man (from Idaho). The overflow is an AG3150e with a sensor on the secondary connection.
-
01-11-2013, 06:11 AM #10
Global Moderator
- Join Date
- May 2000
- Location
- Indianapolis, IN, USA
- Posts
- 31,546
I'd use a "UFO" termination rather than stick those pipes out like that.
-
01-11-2013, 08:59 AM #11
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
These double posts are killin' me. Sorry.....
You can't learn a thing with your mouth open.
-
01-11-2013, 09:01 AM #12
Professional Member
- Join Date
- Aug 2006
- Location
- Panama City, FL
- Posts
- 691
"feel sorry for the guy that has to check the evaporator coil in the future. vent pipes go out the side very easily to keep from blocking evaporator access panel. inducer motor rotates with three screws. intake can be taken out of either side as well. "
In retrospect, I agree. Not having a lot of experience in these, we just aren't thinking that far. Just have to cut and couple.
You can't learn a thing with your mouth open.
-
01-11-2013, 09:43 AM #13
Professional Member
- Join Date
- Aug 2012
- Location
- Palmyra MO
- Posts
- 198
No bigge. On the next one take three bolts out of inducer and spin to preferred side. Trust me in ten years when u are wondering why its tripping limit you can easily verify clean coil.
Originally Posted by hotntired
"feel sorry for the guy that has to check the evaporator coil in the future. vent pipes go out the side very easily to keep from blocking evaporator access panel. inducer motor rotates with three screws. intake can be taken out of either side as well. "
In retrospect, I agree. Not having a lot of experience in these, we just aren't thinking that far. Just have to cut and couple.
Reply With Quote
