Results 1 to 1 of 1
Thread: Honeywell WEB-600 & GPRS
01-09-2013, 04:01 PM #1
Honeywell WEB-600 & GPRS
First time poster.
Just querying if anyone has had any experience with the Honeywell WEB-600's and the GPRS card.
Basically what happens is that the GPRS card will work for a period of time and then one day will fall over and refuse to send out SMS's, as we use it for our alarming of critical points. The only way I have found to be effective at restoring this is by rebooting the JACE - however most of the time this is impractical since of course it looks after the critical plant machines.
The only thing that I can see that might be throwing it off is the very low signal strength, usually around 10-15%.
Appreciate any input, Thanks