Mitsubishi Mini Split system

[simhums]

I have a sun room attached to my house with no heat and limited insulation. I want to add heat to this room. I would like to install a mini split system which is affordable. I was comparing between the Mitsubishi MSZ-GE12NA model and MSZ-FE12NA model. The room is about 200 sq foot. Which model will serve me the best? Thanks.

[myott]

You need to do a load calculation to see what the load is first.
I would go with the FE model, which gives you better heating down to -14.
It also gives you I -see sensor which detects hot/cool spots and directs the air there.
I install a lot of them here in Florida and my customers love them.


Sent from my iPad using Tapatalk HD

[Chuck]

Where are you from? As myott noted, the FE model will provide more heat at colder temps.

[jpsmith1cm]

Moved thread to AOP Forum

[jtrammel]

There are cheaper brands of minisplit. Mitsubishi and daikan are the highest priced but are also the best quality.

[simhums]

I live in NY.

[keviekev70]

There are cheaper brands of minisplit. Mitsubishi and daikan are the highest priced but are also the best quality.

And I see very little difference in quality and performance compare to Fujitsu and LG. Also the more expensive the unit the more expensive the parts for repairs, from what I see.