Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2013
    Post Likes

    Heat Pump w/ Aux Heat - Help replacing Thermostat

    i have an american standard AUY08oR9V3W6 furnace with a 2A6H4030B1000AA heat pump. I currently have a Honeywell VisionPRO TH8000 connected that has recently failed. I decided to install a TH8320ZW as I wanted to play around with z-wave. My problem is that the 8000 controlled the auxiliary heat while the 8320 does not have this option. Is there an easy way to make the furnace control the aux-heat? Thanks in advance for your help and/or comments

    Thermo (T) Furnace HeatPump (HP)
    Y2 Bk
    L W2
    E: Black, W1:White(T),White(HP)
    Aux: White, W1 & W2 have jumper
    E & Aux have jumper R: Red(T), Red(HP)
    S1ink G: Green (T)
    S2 grey B/L: Blue (T),Blue(HP)
    Rc Y: Yellow(T),Yellow(HP)
    R: Red YLo
    Rc & R have jumper Y
    O/B: Orange
    Y: Yellow
    G: Green
    C: Blue

  2. #2
    Join Date
    Dec 2007
    Post Likes
    Most likely will not get the specific answer to your question as DIY info is NOT allowed here.

    Meant as sarcasm;

    Why not have the installing company come out and explain it?
    The Food Stamp Program, administered by the U.S. Department of Agriculture, is proud to be distributing the greatest amount of free meals and stamps EVER.
    Meanwhile, the National Park Service, administered by the U.S. Department of the Interior, asks us to "Please Do Not Feed the Animals". Their stated reason for this policy "... the animals become dependent on handouts and will not learn to take care of themselves."
    from an excerpt by Paul Jacob in Sun City, AZ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.