Has anyone setup a Uniflair DX unit for Modbus RTU?
I got their register list - http://www.apcmedia.com/salestools/J...PGPQ_R0_EN.pdf but it doesn't make sense to me. They are re-using addresses and not specifying the type of registers these are.
I see here shows an updated list on 15-May-2012, but clicking on the link doesn't work. If I copy the link and paste it in a browser and edit out the excess junk I can get it to work but it takes me to the same link above and its date is 4-1-12.
It looks like they are using a Carel controller like a Stulz, maybe I'll see if I can correlate something from Stulz documentation...

If anyone can pass out any pointers it would be appreciated.