do you need a good laugh
Page 1 of 6 123456 LastLast
Results 1 to 13 of 70

Hybrid View

  1. #1
    Join Date
    Sep 2010
    Location
    miami,fl.
    Posts
    602

    do you need a good laugh

    not sure if i uploaded it properly.

  2. #2
    Join Date
    Feb 2004
    Location
    Pacific NW
    Posts
    558
    Maybe needed to pour the heat for 3 minutes to one joint so that there would be plenty of copper oxide in the line for the filter to work on?? No use for a filter if there is nothing to filter?

  3. #3
    Join Date
    Apr 2007
    Location
    Amarillo by mornin'
    Posts
    853
    Is that a MAPP and Oxygen torch kit that he "converted" to Acetylene and Oxygen? He's going to have to replace the Seal-Tite and probably the wiring too now that he's torched it.

    WOW...just WOW

    Check out his part 3 video

    http://www.youtube.com/watch?feature...&v=cmPWPxFnVP0

    putting r-22 in the "systim"
    "It's not that I'm smart, it's that I stay with the problem longer”
    Albert Einstein

  4. #4
    Join Date
    Oct 2005
    Location
    jax fl
    Posts
    84
    omg that is sooooo funny what the hell and he had the balls to put this on line. PLEASE I hope that guy is not in jacksonville fla because I think I have seen some of his work before....... toooo funny. Did he forget that he was taping this thing..... Crazy
    Sir Ace says, Don't hate the breed, just the breeder!

  5. #5
    Join Date
    Nov 2011
    Location
    Michigan
    Posts
    53
    great, now I have to wait for part 2 for the big finish.

  6. #6
    Join Date
    Sep 2010
    Location
    miami,fl.
    Posts
    602
    part 2 is even better he had me fooled at first i thought he had a 4 valve manifold look at the hose hook up. i guess ive been doing it all wrong.

  7. #7
    Join Date
    Jul 2007
    Location
    Phoenix, AZ
    Posts
    205
    OMG. That is classic stuff. He must of went to the Goodman tech school to learn his tricks.

  8. #8
    Join Date
    Jul 2006
    Location
    Northern Colorado
    Posts
    442
    Wow! The sad thing is that he thinks he doing it correctly, based on his replys to some of the comments. Here's part 2:
    Hvac Maniac

    "A negative attitude cancels out positive skills."

  9. #9
    Join Date
    Jan 2005
    Location
    where it's nice and warm
    Posts
    247
    Maybe someone found a video made in the 60s.

  10. #10
    Join Date
    Sep 2008
    Location
    New York
    Posts
    130
    Maybe he should take up video editing. That phone call was fascinating.
    "The only way in which a human being can make some approach to knowing the whole of a subject is by hearing what can be said about it by persons of every variety of opinion and studying all modes in which it it can be looked at by every character of mind.
    No wise man ever acquired his wisdom in any mode but this."
    John Stuart Mill

  11. #11
    Join Date
    Oct 2011
    Location
    Chicagoland Area
    Posts
    4,500
    Where did all the silfos go?

    23 minutes to change a drier...and you say us union guys milk jobs LOL
    Last edited by 2sac; 12-27-2012 at 10:45 AM.
    Officially, Down for the count

    YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET

    I know enough to know, I don't know enough
    Liberalism-Ideas so good they mandate them

  12. #12
    Join Date
    May 2009
    Location
    northern kentucky
    Posts
    143
    I guess where he is from bi directional means one way.

  13. #13
    Join Date
    May 2012
    Location
    Upper Michigan
    Posts
    3,588
    Holy hell I could have swapped the condenser faster than that, I couldn't even watch part two, well on to 3.

Page 1 of 6 123456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event