I installed a 5 ton water to water heat pump..
Told by manufacturer that it holds 68 oz, of 410.
Emptied it,put vacuum to it and filled it with 68 oz.(weighed the tank).
Its heating great but only for 30-45 minutes it shuts down.
When running there is nothing visible in the sight glass;no liquid,no bubbles nothing....
Should there be liquid visible ,if so,what should it look like?
If the glass is full when you view it , it could be hard to tell. Is there a liquid line solenoid on it ?
a site glass is not a charging tool
not to mention: New Member Introduction and Site Rules wrong forum
It`s better to be silent and thought the fool; than speak and remove all doubt.