Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2005

    Workbench tools>Lonworks service

    So, I want to use the workbench on my laptop to scan a lon network that I am connected to via echelon usb plugged into my laptop.
    is there a trick in getting the lonworks service under tools menu of workbench to recognize my USB lon adapter? I have looked at the property sheet of service and it is looking at LON1 which is right, but in device manager screen the Local Lon Device's state remains as "unknown"
    If I run a station on the laptop, the adapter is recognized with no issues.

    I do not want to start a station, I just want to use the workbench as a quick scanning tool.
    Is there any docs explaining the use of lonworks service under tools menu?

    wb version 3.6


  2. #2
    Join Date
    Feb 2005
    Never mind, I understand now.

    goto wb>tools>workbench service manager
    start service.

  3. #3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365