Belimo or T.A.C. actuator that uses this type Of Coupling Puictured

[techservices]

Hello:
What number in the Belimo Actuator Part Number
Will specify the Type of direct coupling pictured in the
Attachment
We are operating over 45 Belimo valves and
the Actuator must have
The same type of coupling pictured in the
above Attachments
What type of Direct Coupling is this called

I need to reorder
24 Volt A.C.
Manual Override
Spring Return
133 Lb Torque
2-10 V.D.C. control signal

Thank you

[D'Laine]

You can download the PDF of Belimo parts and match up what you think you need. You could also call Beilmo, they are popular.
D.

[hvac wiz 79]

Hello:
What number in the Belimo Actuator Part Number
Will specify the Type of direct coupling pictured in the
Attachment
We are operating over 45 Belimo valves and
the Actuator must have
The same type of coupling pictured in the
above Attachments
What type of Direct Coupling is this called

I need to reorder
24 Volt A.C.
Manual Override
Spring Return
133 Lb Torque
2-10 V.D.C. control signal

Thank you

A=133 in-lb, F= spring return, 24=24 vac/dc, SR=2-10vdc
Per the nomenclature I'm looking at but I could be way off. I've been trying to learn more about these for personal knowledge and ease in ordering. There are so many lol. The pdf have is 400+ pages. If you can't find it I can email it to you.

Sent from my SGH-T999 using Tapatalk 2

[Riffdav]

Good afternoon,

I can help with any questions -

The product you are referring to is an AFB24-SR

Please contact me with any questions

[Riffdav]

As a reference I work for belimo -

[hvac wiz 79]

Riffdav what is the "B"?

Sent from my SGH-T999 using Tapatalk 2

[Riffdav]

We have a "b" for basic and a "x" for customized...( longer whip etc)

[hvac wiz 79]

Oh ok. Thank you

Sent from my SGH-T999 using Tapatalk 2

[ascj]

Good afternoon,

I can help with any questions -

The product you are referring to is an AFB24-SR

Please contact me with any questions

Don't you still need an adapter, due to the shorter length of the actuator? Also, what about the connection the OP pictured........I don't see a V clamp in the OP picture?

[Riffdav]

Depending on the application and valve these are on yes there will be a potential linkage.

Please call 1-800-543-9038 and a belimo rep can determine based on the application which linkage is needed.

[njfranco]

SR is spring return

njfranco

[techwizard007]

I think Belimo is the best ive used very easy to work with.

[hvac wiz 79]

SR is spring return

njfranco

F = spring return ... the SR is the control. With SR being 2-10vdc

Sent from my SGH-T999 using Tapatalk 2

[techservices]

I did call a Belimo Rep in Connecticut
I am waiting for the new actuator#AFRB-24
He did not specify if an Adapter is required
Supposedly this will fit the existing valve
The existing set up has a long screw that passes through the plate on the actuator shown and then screws into
the valve stem, (see picture) works very good
We now have over 150 of these type of setups
Cannot be changing out Valves every time an actuator
fails

[Riffdav]

Can you give me an email address and I will contact you.

Looks like you have CCV valves

[techservices]

Riffdav
I am not allowed to post my E-Mail
did not see yours in your profile
My address is visible in my profile
feel free to e-mail me

[wolfdog]

I think Belimo is the best ive used very easy to work with.

Based on your avatar, I would believe you.

[Riffdav]

Sorry I can't change my settings for some reason?

I also can't see your profile ?

Something is happening with my settings it seems

[Riffdav]

If you call the tech support number earlier they can give you the email address and phone number of the NYC Belimo Rep.

[Riffdav]

Or you can email me direct - Email Address Removed