Results 1 to 13 of 18
Thread: Westinghouse Product
-
11-29-2006, 09:49 PM #1
Professional Member
- Join Date
- Nov 2006
- Location
- New Boston, TX
- Posts
- 282
I am a Westinghouse dealer, just wondering if anyone has had any problems with this product?
-
11-29-2006, 09:59 PM #2
Professional Member
- Join Date
- Jan 2005
- Location
- Perth - Western Australia
- Posts
- 775
why would they, all nordyne products seem to be good, i have never seen anything bad
The Captain.
-
11-29-2006, 10:42 PM #3
Professional Member
- Join Date
- Nov 2006
- Location
- New Boston, TX
- Posts
- 282
i agree i was just curious about the new IQ drive if anyone has dealt with this system yet
-
12-01-2006, 01:15 AM #4
No return.
- Join Date
- Jul 2006
- Location
- NW burbs of Detroit
- Posts
- 6,058
It's the new twenty three SEER unit.
Sweet piece of machinery. Another dealer told me there was a problem with a board in the condensing unit that Nordyne has a fix for.
Can't speak to it cause there is not much of a market for it 'round here. But just for sh!ts and giggles I asked the wholesaler about it and he was acting dumb.
-
12-01-2006, 08:58 PM #5
Regular Guest
- Join Date
- Oct 2006
- Location
- Texarkana
- Posts
- 14
Now wouldn't you really rather have a York? rof
-
12-02-2006, 12:43 AM #6
No return.
- Join Date
- Jul 2006
- Location
- NW burbs of Detroit
- Posts
- 6,058
Bite 'cher tongue, Newbie. There be real men talkin' here.
-
12-02-2006, 04:50 AM #7
Professional Member
- Join Date
- Nov 2006
- Location
- The Heart of It All
- Posts
- 236
nordyne,a good piece of equipment? ROFLMAO
-
12-02-2006, 07:40 AM #8
Professional Member*
- Join Date
- Aug 2004
- Location
- Minnesota
- Posts
- 349
There's no other condensor I'd rather install. It's amazing to me they don't advertize as being a very quiet condensor compared to the competition.
-
12-02-2006, 07:41 AM #9
Professional Member*
- Join Date
- Aug 2004
- Location
- Minnesota
- Posts
- 349
Should have said I'm not talking about the 23, just the 14 SEER 410 unit.
-
12-02-2006, 08:53 AM #10
Regular Guest
- Join Date
- Oct 2006
- Location
- Texarkana
- Posts
- 14
Hey lover,
I work with ngerrald, so he knows what that comment is all about.
BEWARE: chilly willy is watching!!! buwaaahaaahaaaa
-
12-02-2006, 10:23 AM #11
No return.
- Join Date
- Jul 2006
- Location
- NW burbs of Detroit
- Posts
- 6,058
Then to both you Newbies
"D
Welcome aboard.
Be nice to other people's Brand lines. Don't digress from thread topic.
-
12-03-2006, 05:01 PM #12
Regular Guest
- Join Date
- Oct 2006
- Location
- Texarkana
- Posts
- 14
lover,
thanx for the welcome. I will surely keep that advice in mind. didn't intend to " flame " anyone's products and I won't digress off of subjest again. Trying to get to 15 posts and professional membership. Thanx!
-
12-03-2006, 05:13 PM #13
Banned
- Join Date
- Mar 2006
- Location
- Delaware
- Posts
- 448
As I recall, Nordyne headed the list for equipment reliability among ALL manufacturers.
Of course, the installer, etc., has an even larger impact.
When the IQDrive comes out in a heat pump, I will one of the first in line for one!
I was considering the Nyle CCHP, but came to my senses. Performance isn't everything, and that unit screams in efficiency. But there are reliability problems.
Personally, I think inverter rotary compressor units are the future.
Still, it's nice they have the reliability reputation AND are pursuing the technology leading edge with that in mind.
IMHO...
John
Reply With Quote
